YSUUSYs NiCd Battery Repair

Cordless Power Tool Batteries that contain Nickel Cadmium (NiCd) Cells can be
Re-Conditioned to perform as well as new or close to new. There is a slight loss of
capacity due to this process but proper maintance after the proceedure will insure
years of usable life.

The First and most common procedure for Re-Conditioning a NiCd cell is by using
a Technique called "VOLTAGE SURGING". Over time the crystals within a NiCd
cell begin to combine and get larger. This causes them to loose capacitance and
also break through the inner seals of the cell. Surging the NiCd cell using a higher
voltage causes the crystals within the NiCd cell to shatter and become smaller.
These smaller crystals have a greater surface area and therefore contain a greater
capacitance for energy. Crystals primarily grow larger during "OVER
CHARGING". Over Charging is the enemy of a NiCd Cells so Remember to leave
your batteries on the charger for only the minimum charging time OR LESS! This
is usually an hour or less for Rapid Chargers or 2 to 4 hrs for standard chargers. It
is also best to only charge your batteries immediately before you use them.
Storing your batteries with a full charge encourages crystal growth. Storing your
batteries on a low charge is best. Follow these maintenance techniques to insure
years of dependable use.
You can Purchase YSUUSY'S original EZ BATTERY FIX on
Ebay by searching for the keyword YSUUSY. The
instructions sold on Ebay include complete charts for
precise surge timing, voltage requirements and procedures

YSUUSY is pronounced "is-so-easy"

Copyright © 2007 ysuusy publishing